Interview with the chief engineer at Uzengineering
FEMALE ENGINEER: “THERE ARE DIFFICULTIES THAT YOU SHOULD NOT BE AFRAID OF” …
The days when engineering was considered a purely male industry are a thing of the past. Today, this profession has become quite prestigious and no longer implies a clear gender division, and therefore there is an unprecedented increase in the popularity of engineering among women.
We present you an interview with the Chief Engineer of the Republican Design Institute "UzEngineering" under the Cabinet of Ministers of the Republic of Uzbekistan Nasretdinova Marhamat, which examines the peculiarities of the work of a female engineer, gender aspects of the profession, views on the professional activity of a design engineer in general and much more.
It should be noted that the interview was prepared by the Association of Consulting Engineers of Uzbekistan within the framework of the ENGINE project, co-funded by the European Union.
Female engineer - how difficult is it?
An engineer in the generally accepted sense is a representative of a technical direction whose activities are aimed at creating, maintaining, repairing, assembling, designing construction and production facilities, equipment of varying complexity and purpose.
Developers, designers, inventors are at the top of the informal professional hierarchy in engineering. So it was before, so it remains to this day. At the same time, creativity in engineering is often accompanied by stress. There may be inconsistencies, overlays, emergency mode of work, late vigils on projects. It is extremely difficult for women, especially family ones, to fit into such a rhythm.
Often girls are afraid to get an engineering profession despite the fact that salaries in this area are quite high. The main reason is the ambiguous attitude of society. In fact, both the management and employees of the opposite sex very quickly change their opinion that girls have no place in engineering as soon as they see their real work results.
The days when engineering was considered a purely male industry are a thing of the past. Today, this profession has become quite prestigious and no longer implies a clear gender division.
At the present stage, there is an unprecedented increase in the popularity of engineering among women. Unique pros are known. It is easier to get an education, a job, and decent pay than it was a few decades ago.
In any engineering company that performs a range of engineering services, there is a suitable position for a female engineer with the necessary knowledge and skills.
On the topic of features, we decided to talk with a professional engineer, head, and just a woman – chief engineer of the Republican Design Institute "Uzengineering" under the Cabinet of Ministers of the Republic of Uzbekistan Marhamat Nasretdinova.
Marhamat Mukhamedzhanovna, hello. Thank you for agreeing to participate in our conversation. The profession of an engineer seems to many to be exclusively male, but nevertheless you have chosen it. What attracted you to this profession?
Good afternoon. Thanks for the invitation. I will answer your question like this. Designers and developers have always been at the top of the professional hierarchy in engineering. This was the case during the Soviet Union, and it remains so to this day. At the same time, creativity in engineering is often accompanied by stress. Possible inconsistencies, overlays, emergency mode of operation. Of course, it is extremely difficult for women to fit into such a rhythm.
Many aspects of engineering are associated with gender specificity. And where there are objectively no barriers for women "at the entrance" to the profession, there are their own subjective limitations. They define the gender "face" of the profession. As for me personally, my interest and love for exact sciences and creativity led me to engineering. Something like that…
Was it difficult to study engineering? How do you think the training of engineering specialists that took place several decades ago differs from the current engineering education?
I did not experience any particular difficulties in the process of studying. But it should be noted that it took a lot of effort and perseverance to get a good education. Modern engineers have slightly different skills compared to their predecessors in their professional activities. For example, such workers used to work with pencils and rulers at the kulman, and now their main tool is a computer.
The introduction of computer-aided design (CAD) systems and their active evolution are transforming the profession of a design engineer, making the developer's work low–cost, less energy-intensive and at the same time more qualitative, while requiring the engineer to possess a much wider range of key competencies
The rapid development of science and technology, the rapid change of some technologies by others, the growth of innovative processes in the field of production and business lead to the need for constant updating of engineers' knowledge and continuous improvement of the quality of their training.
Another question. Now a lot of attention is paid to the introduction of new technologies. What will this change in the design business?
An interesting and relevant question. You know, the construction industry, and with it the design sphere, is often criticized for excessive conservatism and bureaucracy. Yes, we need to move forward, move to the next stage of development. In developed countries, traditional methods of design and construction are gradually being abandoned in favor of innovative ways of developing and implementing projects.
The need for a widespread transition to information modeling technologies of buildings and structures, the so-called BIM technologies, is very much overdue. Such a project is somewhat more expensive than a conventional analogue and its development time exceeds the time required for the development of a conventional project, since the introduction of modern design technologies based on advanced licensed software products, of course, requires significant capital expenditures, and their payback for the project organization is directly related to the increase in the cost and timing of project work. Everything is interconnected.
By the way, our Institute, with the involvement of foreign experts, has already trained and trained a team of specialists who can develop projects in BIM format. Also, as far as I know, the Association of Consulting Engineers of Uzbekistan is also engaged in training BIM technologies for project specialists.
In your opinion, can everyone become successful engineers, and even more so, designers? Or is it a special way for a certain type of people, with a specific mindset and character? And in general, what qualities should a person of your profession possess?
The profession of a design engineer is a profession of mainly intellectual work. In the work of a Design Engineer, the results of his intellectual reflections are important. A design engineer is a person with an analytical mindset and the ability to conduct complex mathematical calculations. Since he needs to cooperate with other specialists involved in the project, he must have communicative qualities. Making drawings is a job that requires perseverance, attentiveness and love of design, the ability to draw and work with special computer programs.
As for the prerequisites for becoming an engineer as a specialist… I'll say this. Anyone can become an engineer, anyone who is interested in technology, creative work and science from a young age.
If it turned out that you prefer exact subjects (algebra, geometry, physics, drawing), take a responsible attitude to calculations, if you are haunted by an unsolved problem and have an irrepressible desire to create, model, improve, design, then the answer is obvious - You are a future engineer.
There is an opinion that engineering is a tedious and boring occupation. Is it so?
If you love what you do and the results of your activity bring satisfaction, then on the contrary, it is a very interesting, exciting activity.
Please tell us how your career has developed, from a higher educational institution to the position where you are working now?
My pre-graduate practice took place at the Uztyazhprom Design Institute, where I was subsequently assigned to work. The direction of the Institute's activity was the design of large industrial enterprises of basic industries, such as chemical, machine-building, oil and gas, energy, mining industries. His career began as an engineer, where he had to constantly study something new in the profession, travel to facilities under construction throughout the republic, sometimes make decisions on the spot on his own. The sense of responsibility for their work has always been present. I have never thought about career growth and believed that the main thing is to be a competent specialist.
I came to the position of chief engineer of the Uztyazhpromproekt Institute after many years, having gained relevant experience and knowledge. Then she continued her work in the Directorate of the State-Owned Joint-Stock Company Uzkimesanoat during the construction of the Dehkanabad potash Fertilizer Plant, where foreign contractors participated in the implementation of the project. The experience gained at the same time is an important part of my work for me. I have been working at the Republican Design Institute "Uzengineering" since its foundation – more than five years.
The content of this article does not reflect the official opinion of the European Union. The responsibility for the information and opinions expressed in the article lies entirely with its author.